At Aims Power, We’re Passionate About Designing And Developing Off-grid And Renewable Energy Solutions.
With the easy to use digital touch screen display, the hybrid inverter can be set up using the following simple modes for your convenience:
• Self-Use – The panels will power the electrical loads first, for FREE and any excess energy is then used to recharge a battery bank. The remaining energy will go back to the grid.
• Selling First – The panels will power the loads first and any excess energy will go back to the grid.
• Charge First – The panels will charge the battery bank first and any excess energy will then power the electrical loads for FREE. The remaining energy will go back to the grid. This setting will also allow you to use solar and grid to recharge the batteries if the solar panels can’t produce enough power to charge the batteries.
See Features Below:
-
Listed to UL 1741-SA I CSA 22.2 No.107-01 I UL1998 I UL1699B
-
Stackable (Max 6)
-
Direct 3 string PV input
-
IP65 NEMA4X rated for outdoor installation
-
10 year warranty
-
Customizable DC input voltage for various battery types including lithium and lead
-
Free USA based tech support
-
Wide programmable voltage input range
-
Generator input for backup 240VAC
-
Wide PV input voltage range
-
Load sharing
-
Isolated emergency backup output for defined loads
-
Configurable charge and load times based on local utility recommendations
-
Loaded with safety features
-
Large 5-inch color LCD
-
RS485, CAN, Wi-Fi, 4G
-
Extremely efficient
-
FCC Part 15 Class B
Specifications
PV INPUT | PIHY9600 9600 WATT (9.6kW) |
---|---|
Max Input Power (kW) | 15 |
Max PV Voltage (V) | 660 |
MPPT Range (V) | 80-550 |
Nominal Voltage | 360 |
Startup Voltage | 100 |
Max Input Current (A) | 15.5 x 3 |
Max Short Current (A) | 26 x 3 |
BATTERY PORT | |
Max Charge/Discharge Power (kW) | 11.5 | 10.3 |
Max Charge/Discharge Current(A) | 50 |
Battery Common Voltage (V) | 230 |
Battery Voltage Range(V) | 80- 495 |
Battery Type | Lithium | Lead |
AC GRID | |
Max Continuous Power(kVA) | 9.6 |
Max Continuous Current(A) | 40 | 46.5 |
Nominal Grid Voltage (V) | 211 to 264 @ 240 | 183 to 229 @ 208 (not 3 phase, split phase) |
Nominal Grid Frequency (Hz) | 60 |
Output Power Factor | .99 adjustable |
Current THD(%) | <3 |
AC BACK-UP & GENERATOR | |
Max Continuous Power(kVA) | 9.6 |
Max Continuous Current(A) | 41 | 46.5 |
Max Peak Currenty (A)(10 min) | 47.9 | 49.5 |
Max Peak Power(kVA)(10 min) | 11.5 | 10.3 |
Nominal AC Voltage L-L(V) | 240 | 208 (not 3 phase) |
Nominal AC Voltage L-N(V) | 120 | 120 |
Nominal AC Frequency(Hz) | 60 |
Switching Time(ms) | <10 |
Voltage THD(%) | <3 |
EFFICIENCY | |
CED Efficiency(%) | 97 |
Max Efficiency(%) | 97.6 |
PV to Battery Efficiency(%) | 98.1 |
Battery between AC Efficiency(%) | 96.8 |
PROTECTION | |
PV Reverse Polarity Protection | YES |
Battery Reverse Polarity Protection | YES |
Over Current/Voltage Protection | YES |
Anti-Islanding Protection | YES |
AC Short Circuit Protection | YES |
Residual Current Detection | YES |
Ground Fault Monitoring | YES |
Insulation Resister Detection | YES |
PV Arc Detection | YES |
Rapid Shut Down | YES |
Enclosure Protect Level | IP65 | NEMA4X |
GENERAL DATA | |
Cooling | Thermal Fan |
Relative Humidity | 0-100% |
Operating Temerature Range | -25 to 60C | -77 to 140F |
Operating Altitude | < 4000 m | <13123 ft without derating |
Noise Emission (dB) | <40 |
Stanby Consumption (W) | <10 |
Mounting | Wall Bracket |
Communication with RSD | SUNSPEC |
Display & Communication Interfaces | Full Color LED, RS485, CAN, Wi-Fi |
Certification & Approvals | UL 1741 SA | CSA 2202 No. 107-01 |UL 1998 | Rules21 | HECO Rule 14 | IP65 | CEC |
EMC | FCC Part 15 Class B |
Dimensions: 23 3/4″ x 15 3/4″ x 9 1/4″ 55 lbs |
Delivery
Order shipment preparation take 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our .